Amiable Impex / AI Earthing

We are the Manufacturer of Cable Lugs and Terminal Ends also includes Cable Lugs for Heavy Duty & Light Duty. These are made of Electro Tinned Copper. It is available with inspection hole and barrel ends which are champhered for easy entry.

Crimping Type Copper Tubular Cable Terminal Ends - Heavy Duty, Cable Lugs - Heavy Duty / Heavy Duty Cable lug Cable Lugs - Heavy Duty / Heavy Duty Cable lug Cable Lugs - Heavy Duty / Heavy Duty Cable lug.

We are the Manufacturer and Exporter of U Bolt Clamp.

Models Details:

U Bolt - Rod To Tape Clamp:

U Bolt - Rod To Cable Clamp - ‘GUV’:

U Bolt For Rigid Pipe & Cables - ‘PUB’

We are the Manufacture and Export of Clamp and Fittings for Earth Rod, Copper alloy clamps are made from Bronze / Gunmetal / High Strength Copper Alloy body which give strong resistance to corrosion. Fasteners are made from high strength Copper Alloy / Steel / Stainless Steel.

Following are the Range of Clamps we offer:

• This clamps can be made from Brass as well as Gunmetal. Kindly select the clamps and let us know your requirement and we will quote you accordingly.

Clamps and Fittings for Earthing Rod:



O Clamps:


Rod To Tape Clamp - A Type:


Rod To Cable Lug Clamp - B Type:

We are the Manufacture and Export of Square Conductor Clamp / Cable Conductor Clamps. Our range of Earthing Lightning Protection also includes Square conductor clamp. These clamps are made of Brass / Gunmetal. It is suitable for 4 way connection, straight, through or tee joints for Round Conductors.

 

Models Details:

We are the Manufacture and Export of Square Tape Clamp / Square Tape Clamps. Our range of Earthing Lightning Protection also includes Square tape clamp. These are suitable for 4 Way Connections, Straight, Through or Tee Joints for Copper Tape.

Models Details:

We are the leading manufacturer and exporter of Earth Bond Tapes and Clamps. Electrical bonding is the practice of intentionally electrically connecting all exposed metallic noncurrent items in a room or building as protection from electric shock. If a failure of electrical insulation occurs, all bonded metal objects in the room will have substantially the same electrical potential, so that a person of the room cannot touch two objects with significantly different potentials. Even if the connection to a distant earth/ground is lost, the person will be protected from dangerous potential differences.

In a building with electricity, it is normal for safety reasons to connect all metal objects such as pipes together to the mains earth to form an Equipotential zone. This is done in the developed countries like U.S.A, U.K etc because many buildings are supplied with a single phase supply cable where the neutral and earth conductors are combined. Close to the electricity meter, this conductor is divided into two, the earth terminal and the wire going to the neutral bus bar in the
consumer unit. In the event of a break in a neutral connection, this earth terminal provided by the supply company will be at a potential (relative to the true earth) which is the same as the live wire coming to the home.

Examples of articles that may be bonded include metallic water piping systems, gas piping, airplanes, ducts for central heating and air conditioning systems, and exposed metal parts of buildings such as handrails, stairs, ladders, platforms, and floors.

A person touching the un-earthed metal casing of an electrical device, while also in contact with a metal object connected to remote earth, is exposed to an electric shock hazard if the device has a fault. If all metal objects are connected together, all the metal objects in the building will be at the same potential. It then will not be possible to get a shock by touching two 'earthed' objects at once.

Bonding is particularly important for bathrooms, swimming pools, and fountains. In pools and fountains, any metallic object (other than conductors of the power circuit) over a certain size must be bonded to assure that all conductors are Equipotential and do not provide a hazardous conductive path. Since it is buried in the ground, a pool can be a better ground than the electric panel ground. With all the conducting elements bonded, it is less likely that electric current will find a path through a swimmer. In concrete pools, even the reinforcing bars of the concrete must be connected to the bonding system to ensure no dangerous potential gradients are produced during a fault.

We Manufacture Heavy Duty Cable Saddle made from Gunmetal and Brass. We also export all kind of Heavy Duty Cast Cable Saddle, which is mainly used for the fixing of the copper cable. These are used with the conductor or for supporting Air Terminals when used in conjunction with wall mounted Air Terminal base.

Models Details:

We are the Manufacture and Export of Cable to Tape Clamps / Square Strip Junction Clamp. Our range of Earthing Lightning Protection also includes U this Junction clamps. These are used for connecting Copper Tape to Cable.

Brass fasteners and Fittings are made of a soft metal such as brass and the tines are typically of two slightly different lengths. This allows easy separation of the tines. A brass fastener is similar in design and function to the mechanical counterpart cotter pins.

Brass fasteners are also an industry standard in binding the screenplays in the film industries across the globe. Brass fasteners are often used as modern scrapbooking embellishments and in Duo-Tang brand paper folders.

We are one of the leading manufacturers and suppliers of Universal Clamp that are widely used in Construction, Building and Engineering Industries. These universal clamps are available with anti-rotation pins for preventing rotation about a longitudinal axis of the clamp assembly.

Universal clamps are designed and developed as per the defined quality standards. The universal clamp can also be custom made as per the detailed specifications of our esteemed customers. Abrasion & corrosion resistance, low maintenance and application specific design are some of their features because of which these are highly demanded in national as well as international markets.

We are the Manufacture and Export of Copper Bonded Rod Coupler, are made from copper alloy & counterbored to completely enclose threads, protecting them from damage & corrosion. This coupler can be made from Brass as well as Gunmetal. Kindly select the clamps and let us know your requirement and we will quote you accordingly.

Models Details:

We offer Cable Cross Clamps. These four-way connectors are suitable for making a cross, straight through or tee joints in the stranded copper conductor.

Models Details:

 

 

We are the manufacturer and exporter of Rod to A Tape Clamp. Corrosion resistance, conductivity and mechanical strength are essential considerations in clamp design to ensure an earthing system remains operative for many years.

Models details: