Amiable Impex / AI Earthing

Our firm is the leading manufacturer of Copper Bonded Earthing Rod.

Models Details:

We are the Worlds Largest and Biggest Manufacturers, Exporter, Suppliers and Dealers of Solid Copper Earthing Rod and Pure Copper Earthing Rod.

Solid copper rods offer greater resistance to corrosion. They are ideally used in applications where soil conditions are very aggressive. Solid copper Earth electrodes are used when better conductivity and corrosion resistance is preferred.

Solid copper Earthing rods are of two types. Externally threaded and internally threaded. Solid Copper Earthing Rod is used where the factor of corrosion is very high and exceptionally long life is required. It Meets ASTM B 133 & ASTM B 187. Due to the softness of solid copper, care must be taken when driving electrode.

Copper bonded earth Rod in 25 Micron, are made from low carbon steel of grade BS 970 or AIS11018 with a high tensile strength. 

Features:

• Perfectly bonded rod will last longer, drive easier and will not crack.
• Corrosion resistance while providing the lowest resistance to ground.
• Threads are rolled by roll threading process, which ensures that when copper covers are maintained, at the root of the thread, Roll thread gives greater strength than cut thread.
• Thread rolling process raises the surface of the rod, so that Thread Dia. (T) is greater than Shank Dia. (S).

Even though many of our products are standard items and of Standard BS Grade, we also make special tailor made products made exactly to the requirements of our customers in terms of Material Grade and Size.

An Earth Rod is an array of electrodes which is installed in the ground to provide a low resistance electrical path to ground or earth. In electrical engineering, ground or earth is the reference point in an electrical circuit from which other voltages are being measured or it is the common return path for electric current or a direct physical connection to the Earth.

Electrical circuits may be connected to ground/earth for several reasons. In mains powered equipment, exposed metal parts are connected to ground or earth to prevent contact with a dangerous voltage if electrical insulation fails. Connections to the ground, limit the build-up of static electricity when handling flammable products or electrostatic-sensitive devices.

For measurement purposes, the Earth serves as a reasonably constant potential reference against which other potentials can be measured. An electrical grounding / earthing system should have an appropriate current-carrying capability to serve as an adequate zero-voltage reference level.

In electronic circuit theory, a "ground" is usually idealized as an infinite source or sinks for the charge, which can absorb an unlimited amount of current without changing its potential. Where a real ground connection has a significant resistance, the approximation of zero potential is no longer valid. Stray voltages or earth/ground potential rise effects will occur, which may create noise in signals or if large enough will produce an electric shock hazard.

Grounding Systems:

For building electrical grounding systems, an array of ground rods and copper bonding cable would serve as the ground bed. Ground rods can be made from steel with a copper clad surface. These are driven vertically into the ground and bonded together with bare copper wire.

Copper Bonded Earth Rod Welded with Clamp is ideal driven earth electrodes, as they offer the installer an economical and efficient earth rod grounding system. Copper Bonded Rod is formed by a rolling process to ensure thread strength and to maintain the integrity of the molecularly bonded copper. The main feature of this type of Copper Bonded Earth Rod is that it does not require any External Clamps and it is highly effective. 

Features:

• High quality
• Reasonable price
• Corrosion resistant

We offer a broad range of Copper Bonded Earthing Pipe. These products offer cost-effective and efficient earth rod Earthing system. These reliable earth rods are corrosion resistant and eliminate electrolytic action. 

Our products are formed of the following:

• Uniformly bonded pure copper electrolyte
• High tensile steel core
• Coupling threads ensure thread strength and maintain the integrity of the bonded copper

Our clients can avail from us a range of Copper Bonded Earthing Pipe which is manufactured using the most premium quality circular rods of low carbon steel for a high tensile strength and durability. We adhere to the specifications of Underwriters Laboratories (UL) 467-2007 and the copper earthing electrode is accordingly molecularly bonded with the exterior of the rod. It is highly effective and widely appreciated for its functionality among our clients.

With the incorporation of latest technology and skilled workforce, we offer a range of safe earthing Electrodes. These products offered by us have remarkable resistance against corrosion and ensure uniform earth contact resistance during their entire lifetime.

• Optional electrical conductivity
• High mechanical strength
• Allow connection to earthing systems like foundation earthing and others

Advantages:

 • Up to 250 micron CU Bonded on Steel
• Life Span: Due to 250 micron CU Bonded life is much more than GI Cu Earthing Rods
• High Conductivity with High Strength
• Cost Effective as comparison to lifespan CU Rods
• Highly Reliable in long Span

Applications:

Efficient Earthing Systems reduce the risk of electrical arcing and fires. Our Safe Earthing Electrode improves reliability for many applications, including:

• Lightning protection systems
• Prevention of accidents caused by static charge and stray currents
• Protection of central communications, electronics, and AC power systems
• Meeting Earthing safety requirements for electrical substations.
• Earth fault neutralization
• Safeguarding critical instrumentation and process control equipment

Additional Information:

• Item Code: GER
• Port of Dispatch: Nhava seva
• Production Capacity: 1000000
• Packaging Details: Gani Bag Packing, Wooden Packing, Reel Packing

We are the Worlds Largest and Biggest Manufacturers, Exporters, Suppliers and Dealers of Copper Bonded Earthing Strip and Copper Bonded Earthing Tape. These are made of High-quality MS Strip with Copper Coating. It forms an essential component of earthing and lightning protection systems.

Models Details:

We are The Biggest and largest Manufacturer, Exporters and Suppliers of Galvanized Steel Earth Rod. It has a male thread at the top and a female thread at the bottom enabling rods to be joined together. The rod is supplied as a standard set complete with toughened steel driving head, hardened steel driving spike and galvanized steel wire rope grip.

Galvanized Steel Earth Rods are made up of high Strength low carbon steel and hot dip galvanized. This design of the rod is actually cost effective option for earthing. Even though many of our products are standard items and of Standard BS Grade, we also make special tailor made products made exactly to the requirements of our customers in terms of Material Grade and Size.

A steel ground rod is an array of electrodes, known as steel ground rods which are installed in the ground to provide a low resistance electrical path to ground or earth. A ground bed is a component in an earthing system. In electrical engineering, ground or earth is the reference point in an electrical circuit from which other voltages are measured, or is a common return path for electric current, or a direct physical connection to the Earth. Electrical circuits may be connected to ground (earth) for several reasons. 

In mains powered equipment, exposed metal parts are connected to ground to prevent contact with a dangerous voltage if electrical insulation fails. Connections to ground limit the build-up of static electricity when handling flammable products or electrostatic-sensitive devices. In some telegraph and power transmission circuits, the earth itself can be used as one conductor of the circuit, saving the cost of installing a separate return conductor. For measurement purposes, the Earth serves as a constant potential reference against which other potentials can be measured. An electrical ground system should have an appropriate current-carrying capability to serve as an adequate zero-voltage reference level. In electronic circuit theory, a "ground" is usually idealized as an infinite source or sink for charge, which can absorb an unlimited amount of current without changing its potential. Where a real ground connection has a significant resistance, the approximation of zero potential is no longer valid. Stray voltages or earth potential rise effects will occur, which may create noise in signals or if large enough will produce an electric shock hazard. 

The use of the term ground (or earth) is so common in electrical and electronics applications that circuits in portable electronic devices such as cell phones and media players as well as circuits in vehicles such as ships, aircraft, and spacecraft may be spoken of as having a "ground" connection without any actual connection to the Earth. This is usually a large conductor attached to one side of the power supply (such as the "ground plane" on a printed circuit board) which serves as the common return path for current from many different components in the circuit.

Solid Copper Earth Rod is made from low carbon steel of grade BS 970 or AIS11018 with a high tensile strength.

Features:

• Perfectly bonded rod will last longer, drive easier and will not crack.
• Corrosion resistance while providing the lowest resistance to ground.
• Threads are rolled by roll threading process, which ensures that when copper covers are maintained, at the root of the thread, Roll thread gives greater strength than cut thread.
• Thread rolling process raises the surface of the rod, so that Thread dia. (T) is greater than Shank dia. (S).

Copper bonded earth rod is made from low carbon steel of grade BS 970 or AIS11018 with a high tensile strength.

Features of Copper Bonded Earth Rod:

• Perfectly bonded rod will last longer, drive easier and will not crack.
• Corrosion resistance while providing the lowest resistance to ground.
• Threads are rolled by roll threading process, which ensures that when copper covers are maintained, at the root of the thread, Roll thread gives greater strength than cut thread.
• Thread rolling process raises the surface of the rod, so that Thread dia. (T) is greater than Shank dia. (S).

Even though many of our products are standard items and of Standard BS Grade, we also make special tailor made products made exactly to the requirements of our customers in terms of Material Grade and Size.

For measurement purposes, the Earth serves as a reasonably constant potential reference against which other potentials can be measured. An electrical grounding / earthing system should have an appropriate current-carrying capability to serve as an adequate zero-voltage reference level.

In electronic circuit theory, a "ground" is usually idealized as an infinite source or sinks for the charge, which can absorb an unlimited amount of current without changing its potential. Where a real ground connection has a significant resistance, the approximation of zero potential is no longer valid. Stray voltages or earth/ground potential rise effects will occur, which may create noise in signals or if large enough will produce an electric shock hazard.

Any kind of special products made from Brass, Copper, Gunmetal, Bronze, Cast Iron, Malleable Iron can be developed, manufactured and supplied exactly as per customer specifications.

Additional Information:

• Packaging Details: We maintain Export Sea worthy packing i.e. it firstly packed in Plastic Packing with Thread protection in PVC Cap and then into Hard PVC Plastic pack. We also pack in wooden Packing on request.

Copper bonded earth Rod in 350 Micron, are made from low carbon steel of grade BS 970 or AIS11018 with a high tensile strength.

??

Salient Features

• Perfectly bonded rod will last longer, drive easier and will not crack.
• Corrosion resistance while providing the lowest resistance to ground.
• Threads are rolled by roll threading process, which ensures that when copper covers are maintained, at the root of the thread, Roll thread gives greater strength than cut thread.
• Thread rolling process raises the surface of the rod, so that Thread dia. (T) is greater than Shank dia. (S).

??

Even though many of our products are standard items and of Standard BS Grade, we also make special tailor made products made exactly to the requirements of our customers in terms of Material Grade and Size.

An earth rod is an array of electrodes which is installed in the ground to provide a low resistance electrical path to ground or earth. In electrical engineering, ground or earth is the reference point in an electrical circuit from which other voltages are being measured or it is the common return path for electric current or a direct physical connection to the Earth.

Electrical circuits may be connected to ground/earth for several reasons. In mains powered equipment, exposed metal parts are connected to ground or earth to prevent contact with a dangerous voltage if electrical insulation fails. Connections to the ground, limit the build-up of static electricity when handling flammable products or electrostatic-sensitive devices.

We are Manufacturer, Exporters and Suppliers of Copper Bonded Earth Rod in 250 Micron UL Listed.

Copper bonded earth rod UL Listed is made from low carbon steel of grade BS 970 or AIS11018 with a high tensile strength. Low carbon steel core is molecularly tended with 99.9% pure electrolytic copper.

Features:

• Perfectly bonded rod will last longer, drive easier and will not crack.
• Corrosion resistance while providing the lowest resistance to ground.
• Threads are rolled by roll threading process, which ensures that when copper covers are maintained, at the root of the thread, Roll thread gives greater strength than cut thread.
• Thread rolling process raises the surface of the rod, so that Thread dia. (T) is greater than Shank dia. (S).

Even though many of our products are standard items and of Standard BS Grade, we also make special tailor made products made exactly to the requirements of our customers in terms of Material Grade and Size.

An earth rod is an array of electrodes which is installed in the ground to provide a low resistance electrical path to ground or earth. In electrical engineering, ground or earth is the reference point in an electrical circuit from which other voltages are being measured or it is the common return path for electric current or a direct physical connection to the Earth.

Grounding Systems:

For building electrical grounding systems, an array of ground rods and copper bonding cable would serve as the ground bed. Ground rods can be made from steel with a copper clad surface. These are driven vertically into the ground and bonded together with bare copper wire.

Additional Information:

• Delivery Time: as per order

Copper bonded earth Rod in 100 Micron, are made from low carbon steel of grade BS 970 or AIS11018 with a high tensile strength. Low carbon steel core is molecularly tended with 99.9% pure electrolytic copper.

Salient Features of Copper Bonded Earth Rod In 100 Micron:

• Perfectly bonded rod will last longer, drive easier and will not crack.
• Corrosion resistance while providing the lowest resistance to ground.
• Threads are rolled by roll threading process, which ensures that when copper covers are maintained, at the root of the thread, Roll thread gives greater strength than cut thread.
• Thread rolling process raises the surface of the rod, so that Thread dia. (T) is greater than Shank dia. (S).

Even though many of our products are standard items and of Standard BS Grade, we also make special tailor made products made exactly to the requirements of our customers in terms of Material Grade and Size.

An earth rod is an array of electrodes which is installed in the ground to provide a low resistance electrical path to ground or earth. In electrical engineering, ground or earth is the reference point in an electrical circuit from which other voltages are being measured or it is the common return path for electric current or a direct physical connection to the Earth.

Electrical circuits may be connected to ground / earth for several reasons. In mains powered equipment, exposed metal parts are connected to ground or earth to prevent contact with a dangerous voltage if electrical insulation fails. Connections to the ground, limit the build-up of static electricity when handling flammable products or electrostatic-sensitive devices.

For measurement purposes, the Earth serves as a reasonably constant potential reference against which other potentials can be measured. An electrical grounding / earthing system should have an appropriate current-carrying capability to serve as an adequate zero-voltage reference level.